Fabrication de carte PCB
PCB multicouche rétro-percé sur mesure avec 2 à 64 couches, rapport d'aspect 16:1 et tolérance à l'impédance ±5%
Custom Backdrill PCB (Stub Removal) Huayihai fabricates custom backdrilled PCBs for high-speed designs. Backdrilling removes the unused portion of a plated through-hole — the stub — after lamination, so backdrilling removes the unused portion of a plated through-hole after lamination, reducing the ...
PCB à composants intégrés personnalisés avec résistances et condensateurs intégrés pour 2 à 64 couches et HDI jusqu'à 2+n+2
Custom Embedded Component PCB Huayihai fabricates custom PCBs with embedded passive components — resistors and capacitors laminated inside the board structure rather than mounted on the surface. Embedded components free outer-layer area for active devices, shorten interconnect paths, and improve ...
PCB haute Tg personnalisée avec options de stratifié haute Tg, jusqu'à 64 couches et compatibilité avec le reflow sans plomb
Custom High-Tg PCB Huayihai fabricates custom high-Tg PCBs on high glass transition temperature laminates. A higher Tg raises the temperature at which the base material softens, which keeps the board dimensionally stable through lead-free reflow, thermal cycling, and elevated operating conditions. ...
PCB contrôlé par impédance personnalisé avec une tolérance de ±5%, une capacité fine de 3/3 Mil et un forage en arrière
Custom Impedance Control PCB (±5% Tolerance) Huayihai fabricates custom impedance-controlled PCBs with a ±5% impedance tolerance. Controlled impedance keeps transmission lines at their target value — typically 50 ohm single-ended or 90/100 ohm differential — so high-speed signals arrive with ...
Fabricant de PCB sans halogène personnalisés - PCB multicouches conformes RoHS et REACH avec 2 à 64 couches
Custom Halogen-Free PCB Huayihai fabricates custom halogen-free PCBs using laminates that avoid brominated and chlorinated flame retardants. Halogen-free construction is specified by customers with environmental, recycling, or restricted-substance requirements, and by products sold into markets that ...
PCB à double face personnalisé avec 0,1 mm de forage, 3/3 mil Trace et 6 oz de cuivre pour les applications industrielles
Custom Double Sided PCB (2 Layer PCB) Huayihai fabricates custom double-sided PCBs (2 layer boards) according to customer Gerber files and technical specifications. Double-sided boards remain the workhorse of industrial and consumer electronics, and Huayihai builds them with the same process ...
Fabrication de PCB HDI personnalisée avec empilement 2+N+2 et microvias laser de 3 mil
Custom HDI PCB (Up to 2+N+2) Huayihai fabricates custom HDI (High Density Interconnect) PCBs for compact, high-density electronic designs. Boards are built according to customer Gerber files, with laser microvias down to 3 mil and sequential lamination stack-ups up to 2+n+2. HDI technology allows ...
PCB de cuivre lourd sur mesure avec un poids de cuivre allant jusqu'à 6 oz pour le transport de courant élevé en 2 à 64 couches
Heavy Copper PCB Fabrication Service Huayihai fabricates custom heavy copper PCBs with copper weights up to 6 oz for high-current and high-power designs. Boards are built according to customer Gerber files, where thick copper traces carry high currents, improve thermal distribution, and increase ...
Circuit imprimé haute fréquence personnalisé avec stratifiés à faible perte, impédance contrôlée Tolérance ±5 %, et largeur de piste de 3/3 mil pour applications RF et micro-ondes
Custom High-Frequency PCB (Rogers / PTFE / Nelco) Huayihai fabricates custom high-frequency PCBs on low-loss laminates including Rogers, PTFE, Nelco, and hybrid constructions. Boards are built according to customer Gerber files for RF and microwave applications where dielectric properties and ...
